What is a LOLER Inspection? Lifting Equipment Regulations Explained
A LOLER inspection (formally a “thorough examination”) is a legally required inspection of lifting equipment and lifting accessories, carried out under the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER).
The regulations apply to any equipment used at work for lifting or lowering loads, including people, and are designed to prevent injury from equipment that’s unsafe, poorly maintained, or used incorrectly.
What equipment is covered by LOLER?
LOLER applies broadly to lifting equipment, including:
- Passenger and goods lifts
- Cranes and hoists
- Forklift trucks
- Scaffold hoists and mobile elevating work platforms (MEWPs)
- Lifting accessories such as chains, slings, shackles and eyebolts
If equipment is used at work to lift a load, including people, LOLER almost certainly applies.
How often is a LOLER inspection required?
The required frequency depends on what the equipment is used for:
- Equipment used to lift people (such as passenger lifts or MEWPs): thorough examination at least every 6 months.
- Other lifting equipment and accessories: thorough examination at least every 12 months.
- Equipment may also require examination after any event likely to have affected its safety, such as substantial repair or a significant change in use.
Who can carry out a LOLER inspection?
A thorough examination must be carried out by a competent person; someone with the specific knowledge, training and independence to assess the equipment properly. In practice, this is usually a specialist engineer-surveyor, often arranged through an insurer or a dedicated inspection body, rather than a general health and safety consultant.
What records are required?
Following a thorough examination, a report must be produced and kept, covering details of the equipment, any defects found, and whether the equipment is safe to continue in use. These records must be retrievable and kept for the legally required period, as the HSE can request to see them during an inspection or following an incident.
What happens if equipment isn’t LOLER-compliant?
Operating lifting equipment without a valid, in-date thorough examination is a breach of the regulations, and enforcement action can follow — particularly serious given that defective lifting equipment is a leading cause of severe workplace injury. Beyond the legal risk, it’s also a straightforward and preventable safety failure.
How SMC Safety Solutions can help
Keeping track of LOLER obligations — what equipment you have, when each item is due for examination, and whether your records are in order — is often where businesses fall behind, especially when it sits alongside everything else on a health and safety checklist.
As part of our health and safety consultancy services, we help businesses understand their LOLER obligations, build a clear inspection schedule, and keep the right documentation in place.
FAQs
How often does LOLER equipment need to be inspected?
It depends on use. Equipment used to lift people needs a thorough examination at least every 6 months, while other lifting equipment and accessories need examination at least every 12 months.
Who can carry out a LOLER thorough examination?
A LOLER thorough examination must be carried out by a competent person with the appropriate specialist knowledge and independence. This is typically a qualified engineer-surveyor, often arranged via an insurer or inspection body.